Where Is The Oil Filter On A Sears Lawnmower

Introduction

Suppose you remember that your Craftsman M215 lawn mower hasn't had an oil alter for some time. And you adopt doing it by yourself as information technology is not very difficult and saves some time and coin compared with bringing it to a workshop. If you lot need tips to alter the oil and air filter in a Craftsman M215 lawn mower, delight get through the following steps.

Earlier using this guide, brand certain to inspect the area around the oil cap to ensure no grit or droppings is there that tin can enter the oil tank. Pace 7 requires yous to exercise the tilting method to do the oil change. You accept to be very cautious as the hot oil may burn your skin if non handled carefully. Earlier start, please ensure you have the required tools and parts necessary for this oil modify and air filter replacement.

Remove the black plastic cover to the air filter using a screwdriver to remove the single screw that secures the cover.

Remove the black plastic cover to the air filter using a screwdriver to remove the unmarried screw that secures the cover.

Take off the filter cover and determine whether the air filter needs to be replaced.

Take off the filter cover and determine whether the air filter needs to exist replaced.
This Craftsman lawnmower uses a standard paper type filter. As you tin see my filter is pretty make clean but if information technology's in really rough shape, it'southward improve to have information technology replaced.

Subsequently making certain the surface area is make clean, Reseat the air filter in its original compartment, ensuring it is positioned correctly.
Cover it past attaching the filter embrace.

Start the engine. It should exist running smoothly compared to how it was before the filter change. If in that location'southward any persistent weird racket, check the filter to ensure it is seated properly.
Next, keep the engine running for approx. 5 to 10 minutes as the adjacent stride is to practice the oil change. This volition help to ensure the oil is warmed up so it drains easily.

Clean the surface area effectually the oil cap with a towel or a cotton cloth.
Detach the spark plug wire if tilting the mower for drainage.[ It's located in the forepart of the lawnmower-right on the left hand side of the air filter].
Nearly Craftsman lawnmowers use SAE30 type engine oils. Oils used in machine engines tin can likewise be used. Make sure you check what the user manual recommends for the oil grade and blazon.

After removing the dipstick with the gray cap, place it on a paper towel and set aside.
Place the funnel in the pipe where the dipstick was located.
Too, make certain to take an empty container where the oil volition exist emptied out.

Tilt the lawn mower on its side (where the air filter will face upwards), open the oil cap and permit the oil to flow into the container until the tank is empty.
While draining the oil, be careful equally the hot oil tin can damage the skin.
In my case, the oil wasn't as bad so i put it back in using a funnel into the oil tank. But make sure to check the recommended oil type in the transmission.
To brand sure the oil is filled to the advisable level, keep checking the oil level with the dipstick until you achieve the right level.

Afterward the oil is filled to the appropriate level, close the grayness cap and allow it to settle downwards. When you're done, clean the piece of work surface area from any spills that occurred.
Make sure to put abroad tools accordingly and dispose of old oil and air filter appropriately equally well.

Conclusion

In the end, start the engine to ensure there's no oil leakage and the engine is running smoothly.

Team

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview